| Assembly overview - catalytic converter with front exhaust pipe (EU3 vehicles) |
Note | t
| After working on the exhaust system, ensure that the system is not under stress and that there is sufficient clearance to the bodywork. |
| t
| If necessary, loosen double and single clamps and align silencers and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded → Chapter. |
| t
| Removing and installing exhaust manifold with turbocharger → Chapter. |
| t
| The flexible joint in the front exhaust pipe must not be bent more than 10° - otherwise it can be damaged. |
| t
| Renew seals, gaskets and self-locking nuts. |
Note | t
| EU3 vehicles have a catalytic converter instead of a particulate filter. |
| t
| The following components are not installed on EU3 vehicles. |
| t
| Pressure differential sender -G505- → Item |
| t
| Exhaust temperature sender 3 -G495- → Item |
| t
| Exhaust temperature sender 4 -G648- → Item |
|
|
|
