Leon Mk2
| Removing, installing and tensioning toothed belts |
| Special tools and workshop equipment required |
| t | Support bracket -10-222A- with legs -10-222A/5- (vehicles ► 05.2000) or -10-222A14- and -10-222A15- (vehicles 06.2000 ►) |
| t | Locking pin -3359- |
| t | Pin wrench -3387- or hexagon wrench |
| t | Locking plate -T10008- (vehicles with hydraulic tensioning system) |
| t | Crankshaft stop -T10050- |
| t | Locking pin -T10115- |
|
|
|
| Special tools and workshop equipment required |
| t | Torque wrench (5…50 Nm) -V.A.G 1331- |
| t | Torque wrench (40...200 Nm) -V.A.G 1332- |
| t | Spring-type clip pliers -VAS 5024 A- |
| t | Drill bit Ø 4 mm (vehicles with hydraulic tensioning system) |
