seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Cooling system: checking for leaks > < Removing and installing radiator

Leon Mk2

Removing and installing electrical radiator fanV7 and radiator fan -2-V177
Removing and installing electrical radiator fan -V7- and radiator fan -2- -V177-
t  Removing → Anchor
t  Fitting → Anchor
Removing
–  Place the lock carrier plate into service position → Bodywork, exterior fitting work; Rep. gr.50
   
–  Remove connecting hose on »hot side« from charge air pipe. To do so, release the hose clamps -1-.
  N19-10337
–  Unplug electrical connection -1- from the radiator fan -V7-.
  Note
Disregard item -2-.
  N19-10240
–  Unscrew the fixing screws -arrows- of the air intake unit -1-and remove the connecting hose -2- to the air filter.
  N21-10252
–  Unscrew the bolts -1- that fasten the radiator to the lock carrier plate.
–  Release the unit from the condenser, coolant chiller and charged air cooler upwards from their bracket on the lock carrier.
  A19-0474
–  Press the upper locking elements -1- on both sides to remove the air duct from the radiator. Take the duct out upwards -arrow-.
–  Remove air vent downwards.
Fitting
Installation is carried out in the reverse order; note the following:
–  Insert the locking element of the air duct of the radiator correctly.
–  Install the hose for the air filter.
–  Place the lock carrier plate into service position → Bodywork, exterior fitting work; Rep. gr.50
  E19-10029

Cooling system: checking for leaks > < Removing and installing radiator