SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Coolant hose schematic diagram >
< Removing and installing coolant temperature senderG62
Leon Mk2
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail)
Engine cooling
Removing and installing parts of cooling system
Removing and installing parts of cooling system
Removing and installing parts of cooling system
t
→ Chapter „Coolant hose schematic diagram“
.
t
→ Chapter „Draining and filling cooling system“
.
t
→ Chapter „Coolant pump and thermostat: component overview“
.
t
→ Chapter „Removing and installing coolant pump“
.
t
→ Chapter „Removing and installing thermostat“
.
t
→ Chapter „Coolant thermostat: check“
.
t
→ Chapter „Pipes, temperature sender, pump for the coolant circulation component overview“
.
t
→ Chapter „Removing and installing coolant temperature sender -G62-“
.
t
→ Chapter „Removing and installing coolant temperature sender at radiator outlet -G83-“
.
t
→ Chapter „Removing and installing coolant circulation pump 2 -V178-“
.
t
→ Chapter „Coolant pipe - front: Removing and installing.“
.
t
→ Chapter „Right coolant pipe: Removing and installing.“
.
t
→ Chapter „Coolant pipe - left: Removing and installing.“
.
t
→ Chapter „Radiator and radiator fan: component overview“
.
t
→ Chapter „Removing and installing radiator“
.
t
→ Chapter „Removing and installing electrical radiator fan -V7- and radiator fan -2- -V177-“
.
t
→ Chapter „Cooling system: checking for leaks“
.
WARNING
When opening the expansion tank, extremely hot vapour may be released; cover the cap with a cloth and open carefully.
Note
t
When the engine is warm, the cooling system is under pressure. If necessary, release pressure before beginning repair work.
t
Secure all hose connections with the correct type of hose clips (same as original equipment)
→ Parts catalogue
.
t
We recommend using pliers -VAS 6499- or pliers for spring-loaded band-type clamp -VAS 6340- for installing spring-loaded band-type clamp.
t
Renew gaskets and seals.
t
The arrows on the coolant pipes and on the ends of the hoses must be aligned with each other.
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail)
Engine cooling
Removing and installing parts of cooling system
Coolant hose schematic diagram >
< Removing and installing coolant temperature senderG62