| –
| Place the guide sleeve -T10015/2- onto the camshaft journal. |
| –
| Slide oil seal over guide sleeve. |
| –
| Press oil seal in all the way using the press sleeve -T10015/1- and the bolt -T10015/3-. |
| –
| Fit camshaft sprockets. |
Note | Note the position of the sprockets with respect to the pins in the camshafts. |
| –
| Lock the respective sprocket with the counterhold -T10016- and tighten the new bolts to a torque of 20 Nm. Retighten the bolt 1/4 turn (90º) |
| Continue installation following reverse order for removing. |
|
|
|
