seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine support rubber bearings: replacement > < Engine assembly brackets

Leon Mk2

Vehicles with air conditioning: additional instructions
Vehicles with air conditioning: additional instructions
  Caution
The air conditioning cooling agent circuit must not be opened. To prevent damage to condenser and cooling agent pipes/hoses, ensure that pipes and hoses are not stretched, kinked or bent.
  Note!
The cooling agent circuit should not be opened except in workshops with the qualified personnel, tools and required equipment.
In order to remove and fit the engine without having to open the cooling agent circuit:
–  Remove the lock carrier plate and the attached pieces: → Rep. Gr.50.
–  Remove the braces of the cooling agent tubes.
–  Remove the Poly-V ribbed belt → Chapter.
–  Remove the air conditioning compressor: → Rep. Gr.87.
–  Unscrew the cooling agent tubes from their attachments on the crossbeam.
   
–  Put the air conditioning compressor to one side along with the lock carrier plate in such a way that the flexible tubes of the cooling agent -arrows- are not under any strain.
–  Place the attachment tool -T20127- and secure it with a workshop crane.
–  Release the bolts that attach the engine assembly to the gearbox and engine supports.
–  Withdraw the engine assembly towards the front.
  Note!
Pay a maximum of attention and protect components in order to avoid any damage or strain on the bodywork or on any of the air conditioning installation components.
  V10-1335

Engine support rubber bearings: replacement > < Engine assembly brackets