seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft seal, pulley side: replacing|Fit > < Crankshaft seal, pulley side: replacing

Leon Mk2

Remove
Remove
–  Remove the Poly-V belt → Chapter.
–  Remove the toothed belt → Chapter. Toothed belt: removing and fitting, tightening
–  Remove the toothed belt/crankshaft pinion, immobilising it with countersupport -T20018A-.
–  Oil the threaded head of seal extractor -T20031B-, position it and, pressing hard, thread it into the seal as far as possible.
   
–  Turn the centre bolt against the crankshaft until the seal comes out.
  E13-0112

Crankshaft seal, pulley side: replacing|Fit > < Crankshaft seal, pulley side: replacing