Leon Mk2
| Cooling system components, bodywork side |
| 1 - | Radiator |
| q | Removing and installing → Chapter |
| q | After renewing it, change all of the coolant liquid |
| 2 - | Lock support |
| q | Removing and installing → Bodywork, assembly tasks; Rep. Gr.50 |
| 3 - | Radiator cooling fan |
| 4 - | 10 Nm |
| 5 - | Support |
| q | For cooling fan |
| 6 - | Connector |
| 7 - | Lower coolant liquid flexible hose |
| q | To the front coolant hose → Item |
| 8 - | Upper coolant liquid flexible hose |
| q | To the thermostat housing → Item |
| 9 - | Expansion tank |
| 10 - | Plug |
| q | Test with the tester -V.A.G. 1274- along with 1274/4 |
| q | Testing pressure 1.4...1.6 bar |
| 11 - | Cover |
| 12 - | Towards the thermostat housing |
| q | → Item |
| 13 - | Towards the coolant liquid hose |
| q | → Item |
| 14 - | Temperature switch -F18-, 35 Nm |
| q | For cooling fan |
| q | Switching temperatures: 1st speed connects: 92...97 °C disconnects: 84...91 °C 2nd speed connects: 99...105 °C disconnects: 91...98 °C |
