Leon Mk2
| Air filter: disassembling and assembling |
| Removing and installing air filter → Chapter |
| 1 - | Securing bolts |
| q | For air filter's element upper element |
| q | Tightening torque: 3 Nm |
| q | If using an electrical/pneumatic screwdriver: 200/min. max. |
| 2 - | Securing bolts |
| q | For securing the intake manifold, the air filter's upper element and the air filter |
| q | Tightening torque: 3 Nm |
| q | If using an electrical/pneumatic screwdriver: 200/min. max. |
| 3 - | Air filter's upper element |
| 4 - | Filter cartridge |
| 5 - | Temperature regulator |
| q | For intake air preheating |
| q | Observe the fitting position |
| 6 - | Joint |
| q | Renew if deteriorated |
| 7 - | Vacuum hose |
| q | It goes towards the retention valve in the flexible vacuum hose between the intake manifold and the brake servo → Item |
| 8 - | Air filter's lower element |
| 9 - | O-ring |
| q | Ensure firm seating |
| q | Renew if deteriorated |
| 10 - | Staple |
| 11 - | Tube for oil sump deaeration |
| 12 - | Hose for hot air intake |
| q | From the hot air collecting plate on the exhaust manifold |
| 13 - | Intake air duct with regulating flap |
| q | Test intake air preheating → Chapter |
| 14 - | 8 Nm |
