–
| Remove the exhaust manifold assembly/turbocharger and place it on the power steering. |
–
| Remove the exhaust manifold assembly/turbocharger from the top. |
Caution After removing the exhaust manifold/turbocharger unit, fit the cylinder head cover, to prevent foreign agents filtering into the engine. |
|
Install in the reverse order from removal, remembering the following: |
Note t
| Always replace seals, gaskets and self-locking nuts. |
t
| Charge the turbocharger with engine oil using the connection sleeve of the oil supply pipe. |
t
| After fitting the exhaust gas turbocharger, allow the engine to run at idle for about 1 minute, without accelerating; this will lubricate the turbocharger. |
–
| Installing hose connections with connector couplings → Chapter. |
|
|
|