When working on the exhaust gas turbocharger, pay careful attention to the following „5 rules“: |
l
| Thoroughly clean all joints and connections and the surrounding areas before dismantling. |
l
| Place removed parts on a clean surface and cover. Use only lint-free cloths. |
l
| If repairs cannot be completed in one session, all parts and components that are left open should be covered or stored with the greatest of care |
l
| Only fit clean components: only remove replacement parts from packaging immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes etc.). |
l
| If the system is open, do not apply compressed air if possible. Do not move vehicle unless absolutely necessary. |
|
|
|