SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing radiator >
< Repairing cooling system
Leon Mk2
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Engine cooling
Repairing cooling system
Removing and installing cowling together with radiator fanV7 and radiator fan on right of radiatorV35
Removing and installing cowling together with radiator fanV7 and radiator fan on right of radiatorV35
Removing and installing cowling together with radiator fan -V7- and radiator fan on right of radiator -V35-
Removing
–
Remove engine cover
→ Chapter
.
–
Dismount the air filter housing together with the air mass meter and the connecting pipe
→ Chapter
.
–
Remove upper securing bolts
-upper arrows-
of cowling.
–
Remove noise insulation
→ General body repairs, exterior; Rep. gr.50
.
–
Remove connecting hose on
»hot side«
from charge air pipe. For this purpose undo hose clamps
-1-
and
-2-
.
–
Disconnect connector
-1-
.
–
Unscrew lower bolts
-lower arrows-
.
–
Remove cowling together with radiator fans downwards.
–
Thread out electrical connector
-1-
(if fitted)
-2-
. Uncover cables.
–
Remove the nuts
-arrows-
and remove the radiator fan.
Installing
Installation is in the reverse sequence of removal.
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Engine cooling
Repairing cooling system
Removing and installing cowling together with radiator fanV7 and radiator fan on right of radiatorV35
Removing and installing radiator >
< Repairing cooling system