Leon Mk2
| Fuel pre-supply pump -G6- and the fuel level gauge sender -G-: Assembly overview |
| 1 - | Fuel delivery unit |
| q | Removing and installing → Chapter |
| q | Checking fuel pump (electrical test) → Chapter |
| 2 - | Join ring |
| q | Renewing |
| q | When installing, fit seal (dry) in opening in fuel tank |
| 3 - | Fuel supply line |
| q | Black |
| q | For the fuel filter |
| q | Do not kink. |
| q | Connected to connection marked „V“ on sealing flange |
| q | To extract from sealing flange, press release tab on connection |
| q | Clip to the fuel tank |
| 4 - | Fuel return line |
| q | Blue |
| q | From the fuel cooler |
| q | Do not kink. |
| q | Reaches to the connection marked „R“ on flange |
| q | To extract from sealing flange, press release tab on connection |
| q | Clip to the fuel tank |
| 5 - | Electric connector |
| q | For the fuel pre-supply pump -G6- and the fuel level gauge sender -G- |
| 6 - | Seal ring 110 Nm |
| q | Remove and install with key -T10202- |
| 7 - | Fuel gauge senders -G- |
| q | Checking resistance values → Chapter |
| q | Removing and installing → Chapter |
