WARNING |
Note | t
| Secure the hose connections with original clamps. |
| t
| The couplings and air hoses of the supercharging system must be free from oil and grease before assembling. Only in the case of plug-in couplings, the sealing ring and sealing surface must be oiled slightly → Chapter. |
| t
| The supercharger air system should not leak |
| t
| Renew self-locking nuts. |
| t
| Pliers -T20174- are recommended for fitting spring-type hose clips. |
| t
| Fill the turbocharger at the coupling of the oil supply pipe with engine oil. |
| t
| After fitting the turbocharger, allow the engine to idle for 1 minute without accelerating to ensure turbocharger oil supply. |
| Exhaust turbocharger - assembly overview → Chapter |
| Turbocharger: removing and fitting → Chapter. |
| Checking vacuum unit for turbocharger → Chapter. |
| Removing and installing vacuum unit for turbocharger → Chapter. |
| Adjust vacuum unit for turbocharger → Chapter. |
|
|
|
