Leon Mk2
Fuel rail with injectors - Assembly overview |
1 - | O ring |
q | replace |
q | Before installing moisten with clean engine oil |
2 - | Elastic element |
q | Replace every time the lower part of the intake manifold is removed |
q | Check that it is properly fitted on the injector |
3 - | Injector |
q | Injector, cylinder 4 -N33- |
q | Injector, cylinder 1 -N30- |
q | Injector, cylinder 2 -N31- |
q | Injector, cylinder 3 -N32- |
q | With Teflon seal and support washer |
q | After dismounting the injector, the Teflon seal and support washer should be replaced → Chapter |
q | removing and fitting → Chapter |
4 - | Intake manifold lower part: |
q | removing and fitting → Chapter |