SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder Fuel-injection engine (1.4l, 4 valves) | Enginecrankshaft group, pistons | Engine block, flanges | Crankshaft sealing flange, on the flywheel side: Replace ( Assembly tool T10017 ) | D - Press the sender wheel with the centre guide T10017 onto the crankshaft flange:

D - Press the sender wheel with the centre guideT10017 onto the crankshaft flange:

D - Press the sender wheel with the centre guide -T10017- onto the crankshaft flange:

–	Tighten the hexagon nut of the assembly tool using the torque wrench -VAG 1331- and tighten using the insert 24mm terminal -VAG 1332/11-. Tightening torque: 35 Nm

Note

A small air gap must be present between cylinder block and sealing flange after tightening hexagon nut to 35 Nm.