–
| Tighten the hexagon nut of the centre guy -T10134- using the torque wrench -V.A.G 1331- and the insert e/c 24 terminal -V.A.G 1332/11- to 40 Nm. |
–
| Check the fitting position of the sender crown on the crankshaft once more. → Chapter. |
If the dimension -a- is too small: |
–
| Tighten the hexagonal bolt of the centre guide -T10134- to a torque of 45 Nm. |
–
| Check the fitting position of the sender crown on the crankshaft once more. → Chapter. |
|
|
|