Leon Mk2
| Fuel tank, vehicles with front wheel drive installation overview |
| 1 - | Supply pipe |
| q | Black colour |
| q | Check for secure seating. |
| q | Hose positioning → Fig. |
| 2 - | Return pipe |
| q | Blue colour |
| q | Check for secure seating. |
| q | Hose positioning → Fig. |
| 3 - | Oil seal |
| q | Replace. |
| q | When fitting, fit seal (dry) in opening in fuel tank |
| q | Moisten with fuel only when installing flange |
| 4 - | Fuel delivery unit |
| q | Removing and fitting → Chapter |
| q | If the fuel delivery unit has been replaced, the engine control unit must be adapted to the fuel pump → Vehicle diagnosis, testing and information system VAS 5051“Guided function”. |
| q | Fuel pump: Checking → Chapter |
| q | Note fitting position on fuel tank → Fig. |
| q | With fuel level indicator sender -G- |
| q | Removing and fitting the Fuel level indicator sender -G- → Chapter |
| q | Clean strainer if dirty |
| 5 - | Seal ring 110 Nm |
| q | Check for secure seating. |
| q | Removing and installing with the rotation tool -T10202- |
| 6 - | Filler cap set |
| q | With dustguard |
| q | Removing and installing → Bodywork, exterior fitting work; Rep. Gr.55 |
| 7 - | Plug. |
| q | If this is damaged, replace it |
| 8 - | Securing bolt |
| q | Tighten to a torque of 1.5 Nm |
| 9 - | Earth connection |
| q | Check for secure seating. |
| 10 - | 10 Nm |
| 11 - | Suction pump |
| q | Fixed to fuel level sender 2 -G169- |
| q | Removing and fitting → Chapter |
| 12 - | Fuel level sender 2 -G169- |
| q | Removing and fitting → Chapter |
| 13 - | Fuel tank |
| q | Removing and fitting → Chapter |
| 14 - | tension belt |
| q | Note fitting position: |
| 15 - | 25 Nm |
| q | Replace. |
| 16 - | Protector plate |
| q | Riveted with the exhaust system anchorage suspension |
| 17 - | Supply pipe |
| q | Leads to the fuel distributor |
| q | Check for secure seating. |
| 18 - | Fuel filter: |
| q | The arrow indicates the flow direction |
| q | Hose positioning → Fig. |
Note
|
|
