Leon Mk2
Intake manifold: assembly overview |
1 - | 10 Nm |
2 - | Hose clamp |
3 - | 3 Nm |
4 - | Head bolts, 10 Nm |
5 - | Shutter |
q | Replace. |
6 - | Intake manifold |
q | Removing and installing → Chapter |
q | With inlet manifold plate |
7 - | Coupling rod |
8 - | Intake manifold flap motor -V157- withintake manifold flap potentiometer -G336-: |
q | Removing and installing → Chapter |
9 - | 7 Nm |
10 - | to active carbon reservoir |
11 - | Flexible tube |
12 - | Solenoid valve 1 for active carbon filter -N80- |
13 - | Flexible tube |
14 - | Double non-return valve |
q | check → Chapter |
15 - | Intake manifold support |
16 - | 25 Nm |
17 - | 10 Nm |
18 - | Bonded rubber bush |
19 - | Throttle valve control mechanism -J338- |
q | Removing and installing → Chapter |
q | With activation of the throttle valve control for electric accelerator control -G186-, angle senders 1 for throttle valve control with electric accelerator control -G187- and angle sender 2 for throttle valve control with electric accelerator control -G188- |
20 - | 7 Nm |
21 - | Oil seal |
q | Replace if damaged |
22 - | 5 Nm |
23 - | Intake air temperature sender -G42- |
24 - | 10 Nm |