seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Spark plug test data > < Removing and installing ignition coils with output stages

Leon Mk2

Removing knock sensor 1G61
Removing knock sensor 1 -G61-
Removing → Anchor
Installing → Anchor
Removing
   
–  Unplug electrical connector -2- at knock sensor 1 -G61-.
–  Remove the coolant pump and the regulator → Chapter.
  Note
Knock sensor 1 -G61- is located below the intake manifold and behind the coolant pump.
–  Remove knock sensor 1 -G61--2-.
Installing
–  Installation is carried out in reverse order.
l  Tightening torque: Ignition system - Assembly overview → Chapter
  A24-10427

Spark plug test data > < Removing and installing ignition coils with output stages