Leon Mk2
Note
|
1 - | Radiator |
q | Removing and installing → Chapter |
q | Renew coolant after replacing. |
2 - | Coolant hose |
q | To turbocharger |
3 - | Coolant hose |
q | At top of the low-temperature cooler |
4 - | Coolant hose |
q | To turbocharger |
5 - | Coolant hose |
q | To the charge-air cooler in the intake manifold |
6 - | Radiator fan -V7- and radiator fan 2 -V177- |
q | With coolant fan control unit -J293- |
q | According to versions |
7 - | Coolant hose |
q | Coolant pipe below the intake manifold |
8 - | Coolant hose |
q | To fuel radiator |
9 - | Expansion tank |
q | Perform cooling system leakage check with cooling system tester -VAG 1274B- and the adaptor -VAG 1274/8- |
10 - | Electrical connector |
11 - | Sealing plug |
q | Check with cooling system tester -VAG 1274B- and adaptor -VAG 1274/9- |
q | At a pressure of 1.4 ... 1.6 bars pressure release valve should open. |
12 - | 5 Nm |
13 - | Plastic inserts |
q | For fastening bolts |
14 - | Retainer |
15 - | Coolant hose |
q | At the coolant circulation pump -V50- |
16 - | Cowling |
17 - | 5 Nm |
18 - | 5 Nm |
19 - | Coolant hoses |
q | Housing for the thermostat |
20 - | Coolant hose |
q | To heat exchanger for heater unit |
21 - | Joint mouth |
q | At top of radiator |
22 - | Joint mouth |
q | At bottom of radiator |
23 - | Retaining clip |
24 - | Radiator outlet coolant temperature sender -G83- |
25 - | O ring |
q | If this is damaged, replace it |
26 - | Radiator mount |
27 - | Radiator mount |
28 - | 5 Nm |