SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Check the cooling system for leaks >
< Radiator fanV7: removal and installation (Altea, Altea XL, Leon)
Leon Mk2
Power unit
4 cylinder Injection engine (1.2 l direct injection engine, turbocharger)
Engine cooling
Components of the cooling system: Removing and installing
Removing and installing radiator fanV7 (Ibiza)
Removing and installing radiator fanV7 (Ibiza)
Removing and installing radiator fan -V7- (Ibiza)
Removal:
–
Separate the under body protection.
–
Unplug connector
-arrow-
.
–
Open the hose guides in the cowling using the
-2-
and remove the coolant hose
-1-
.
–
Engage the cowling with radiator fan -V7- to the locking hook using a suitable tool.
–
Push cowling together with radiator fan -V7- upwards out of the mountings and remove downwards.
–
Remove bolts
-arrows-
of the heat guard.
–
Clip out the radiator cowl and remove towards the back.
–
Take out the electric wiring
-1-
from wiring guide.
–
Unscrew attachment nuts
-arrows-
and take out the radiator fans -V7-.
Installing
Installation is carried out in the reverse sequence; note the following:
Tightening torques:
Component
Nm
Radiator fan on the cowling
8
Heat guard on the cowling
2
Power unit
4 cylinder Injection engine (1.2 l direct injection engine, turbocharger)
Engine cooling
Components of the cooling system: Removing and installing
Removing and installing radiator fanV7 (Ibiza)
Check the cooling system for leaks >
< Radiator fanV7: removal and installation (Altea, Altea XL, Leon)