seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Poly-V belt: Removing and installing > < Poly-V belt mechanism, list of components

Leon Mk2

Pulley for the crankshaft: Removing and installing
Pulley for the crankshaft: Removing and installing
t  Removing → Anchor
t  Fitting → Anchor.
   
Removing
Requirement
l  Poly-V belt removed → Chapter.
–  Remove central soundproofing -Anchorage points 1 ... 3-.
  Note
To loosen and tighten the crankshaft pulley, lock the crankshaft with a ring spanner on centre bolt.
  A10-1565
–  Remove crankshaft pulley.
  A13-0356
Installing
Installation is carried out in the reverse order of removal while noting the following:
–  Only install crankshaft pulley with genuine bolts → ETKA (electronic parts catalogue).
t  Can only be fitted in one position: The borehole -arrow- in the pulley / crankshaft must be positioned above the raised section of the pulley
  A13-0134

Poly-V belt: Removing and installing > < Poly-V belt mechanism, list of components