SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder injection engine (1.6l 4V, Chain control) | Engine assy,cylinder block,crankcase | Engine: removing and fitting

Torque settings

Bolted joint		Tightening torque
Bolts, nuts	M 6	10 Nm
	M 8	20 Nm
	M 10	45 Nm
	M 12	60 Nm
Exhaust pipe to exhaust manifold		40 Nm

Engine assembly mountings

Note

The fastening bolts of the engine assembly brackets are expandable bolts and must be replaced.

Engine assembly mountings

A → Note = 20 Nm + retighten 90° (¹/₄ turn)

B → Note = 30 Nm + retighten 90° (¹/₄ turn)

¹⁾

Replace

Gearbox support assembly

A → Note = 50 Nm + retighten 90° (¹/₄ turn)

B → Note = 40 Nm + retighten 90° (¹/₄ turn)

²⁾

Replace

Pendulum support

A → Note = 30 Nm + retighten 90° (¹/₄ turn)

B → Note = 40 Nm + retighten 90° (¹/₄ turn)

³⁾

Replace

SEAT Workshop Service and Repair Manuals