seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Torque settings

Leon Mk2

Vehicles with air conditioning: additional instructions and assembly work
Vehicles with air conditioning: additional instructions and assembly work
  Note
Do not open the refrigerant circuit To avoid damage to the condenser and coolant pipes/hoses, take care not to bend, twist or stretch the pipes/hoses excessively.
To facilitate removing and installing the engine without opening the refrigerant circuit:
–  Remove the clip/s from the cooling agent hose/s.
–  Poly-V belt: Removing → Chapter.
–  Remove the lock carrier and attachment parts: → Bodywork, exterior assembly work; Rep. Gr.50
–  Remove the air conditioner compressor with connected refrigerant pipes from its support. → Heating, air conditioning; Rep. Gr.87
–  Place the radiator, condenser and compressor to the side, so that the refrigerant pipes and hoses do not get trapped.
   

Enginecrankshaft group, pistons > < Torque settings