seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
To remove the sealing flange with the sender wheel from the crankshaft > < Tightening procedure of the Poly-V belt sprocket bolts

Leon Mk2

Sealing flange for the crankshaft, flywheel side: Replace
Sealing flange for the crankshaft, flywheel side: Replace
Consult the equivalence table for tools and equipment according to applicability between Seat / VW / Audi / Skoda → Chapter
   
Special tools and workshop equipment required
t  Assembly tool -T10134-
t  Torque wrench (5 - 50 Nm) -V.A.G 1331-, see equivalent → Anchor
t  Insert e/c 24 terminal -V.A.G 1332/11-, see equivalent → Anchor
t  Three hexagonal bolts M6X35 mm
t  Calibre
t  Dial caliper

   

To remove the sealing flange with the sender wheel from the crankshaft > < Tightening procedure of the Poly-V belt sprocket bolts