seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel filter - assembly overview > < Fuel delivery unit: Removing and installing

Leon Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
  Note
Gradual fitting of fuel supply units with modified fuel level senders. -G-.
   
Removing (old version):
–  Remove fuel delivery unit → Chapter.
–  Release the connectors -arrows- and detach the electrical cables -1, 2 and 3-.
–  Lever off the retaining lugs -4- and -5- using a screwdriver and remove the Fuel gauge sender -G- by pulling downwards -arrow- .
Installing
–  Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–  Insert connector and check they have engaged properly.
–  Install fuel delivery unit → Chapter.
  N20-10274
Removing (new version)
–  Remove fuel delivery unit → Chapter.
–  Move the fuel gauge sender -G-up and to the side.
  N20-10175
–  If the sender cannot be removed, the retaining lugs -arrows- must be pushed to the side a little.
–  Note the colours of the lines for fitting.
  A20-10067
–  Unlock and remove the plug connectors -1 - 3-.
  A20-10431
Installing
–  Plug the connectors -1 - 3- checking that they engage well.
–  Insert the fuel gauge sender -G- into the guide on fuel delivery unit and press downward until it clicks into place.
–  Install fuel delivery unit → Chapter.
  A20-10431

Fuel filter - assembly overview > < Fuel delivery unit: Removing and installing