Leon Mk2
Cooling system, bodywork side: disassembly and assembly |
1 - | Radiator |
q | Removing and fitting → Chapter |
q | After replacing, refill all coolant |
2 - | O-Ring |
q | Replace if there is damage or deterioration |
3 - | Upper coolant hose |
q | Secured to radiator with retaining clip |
q | Check for secure seating |
q | Connection schema for the coolant tubes → Chapter |
4 - | Cover |
q | Verify using the tester for cooling systems -V.A.G 1274- and the adapter -V.A.G 1274/9- → Chapter |
5 - | Connector |
6 - | 10 Nm |
7 - | Air duct |
8 - | 10 Nm |
9 - | Expansion tank |
10 - | Additional fan |
q | Only vehicles with optional equipment |
11 - | Support |
12 - | Securing clip |
q | Check for secure seating |
13 - | Radiator fan -V7- |
q | Checking → Chapter |
14 - | Support |
q | For the ventilator connections |
15 - | Lower coolant hose |
q | Connection schema for the coolant tubes → Chapter |
16 - | Thermal switch -F18-, 35 Nm |
q | For the radiator fan |
q | Switching temperatures: |
1a Stufe |
q | Connection: 92 … 97 °C |
q | Disconnection: 84 … 91 °C |
2a Stufe |
q | Connection: 99 … 105 °C |
q | Disconnection: 91 … 98 °C |
17 - | Support |
q | For radiator |
q | Note the fitting position |
q | Note that different versions exist |
18 - | 15 Nm |
19 - | Support |
q | For radiator |
q | Note the fitting position |
q | Note that different versions exist |