seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Supercharger pressure sensor G31 with intake air temperature sensor G42 : removing and installing, vehicles with engine code B > < Engine speed sender G28 : removing and fitting

Leon Mk2

Supercharger pressure sensorG31 with intake air temperature sensorG42: Removing and installing, vehicles with engine codes AZV - BKD
Supercharger pressure sensor -G31- with intake air temperature sensor -G42-: Removing and installing, vehicles with engine codes AZV - BKD
t  Removing → Anchor
t  Fitting → Anchor
t  Tightening torque → Anchor
   
Removing
Engine cover (version 1):
–  Take out the oil dipstick -1- from its guide tube.
–  Lift the engine cover sideways -arrows 2- and extract to the front -arrow 3-.
–  Replace the oil dipstick in the guide tube.
  E10-10002
Engine cover (version 2):
–  Detach the outer -1- and inner -2- engine covers, by pulling them evenly upwards.
  E10-10038
All vehicles (continued):
–  Remove the air intake hose -arrow- between the lock carrier plate and the air filter housing.
  A17-0354
–  Separate electrical connection-arrow-.
–  Unscrew the two attachment bolts.
Fitting
Installation is carried out in the reverse order.
Tightening torque
  A23-0207
ComponentNm
Supercharger pressure sender -G31- with intake air temperature sender -G42- air conduit tube8

   

Supercharger pressure sensor G31 with intake air temperature sensor G42 : removing and installing, vehicles with engine code B > < Engine speed sender G28 : removing and fitting