seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel level sender 2 G169 : check > < Fuel gauge senders G : Removing and installing (vehicles up to approx. 10.2004)

Leon Mk2

Fuel gauge sendersG: Removing and installing (vehicles from approx. 10.2004)
Fuel gauge senders -G-: Removing and installing (vehicles from approx. 10.2004)
t  Removing → Anchor
t  Fitting → Anchor
   
Removing
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
  Caution
Before unplugging the connectors of the fuel level sender -G-, unlock the terminal contact clips.
–  Unlock the connectors -1 to 3- and separate them.
–  Levering with a screwdriver, raise the securing clips -4- and -5- and remove the fuel level gauge sender -G- downwards -arrow-.
Fitting
Installation is carried out in the reverse sequence; note the following:
–  Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–  Plug the connectors checking that they engage well.
–  Install fuel delivery unit → Chapter.
  A20-10048

Fuel level sender 2 G169 : check > < Fuel gauge senders G : Removing and installing (vehicles up to approx. 10.2004)