SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder TDI Engine, 2.0 l, 4 V with injector pump, mechanics | Fuel supply, gas operation | Fuel supply system | Fuel gauge senders G : Removing and installing (vehicles up to approx. 10.2004)

Fuel gauge sendersG: Removing and installing (vehicles up to approx. 10.2004)

Fuel gauge senders -G-: Removing and installing (vehicles up to approx. 10.2004)

t	Removing → Anchor

t	Fitting → Anchor

Removing

Observe safety precautions → Chapter.

Observe rules for cleanliness → Chapter.

–	Remove fuel delivery unit → Chapter.

Caution

Before unplugging the connectors of the fuel level sender -G-, unlock the terminal contact clips.

–	Unlock the connector clips -1- and -2- and unplug the connectors.

–	Levering with a screwdriver, raise the securing clips -3- and -4- and remove the fuel level gauge sender -G- downwards -arrow-.

Fitting

Installation is carried out in the reverse sequence; note the following:

–	Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.

–	Plug the connectors checking that they engage well.

–	Install fuel delivery unit → Chapter.

SEAT Workshop Service and Repair Manuals