Leon Mk2
| Fitting locations overview |
| 1 - | Fuel pressure regulator |
| 2 - | Intake manifold pressure sender -G71-* with intake air temperature sender -G42-* |
| 3 - | Intake manifold |
| 4 - | Injectors -N30-…-N33-* |
| 5 - | Knock sensor 1 -G61-* |
| q | → Item |
| 6 - | Lambda probe after catalytic converter -G130-*, 50 Nm |
| 7 - | Throttle valve control part -J338-* |
| 8 - | Engine speed sender -G28-* |
| q | Inductive sender |
| q | Fitting location: cylinder block intake side |
| 9 - | Earth connection |
| 10 - | Brake pedal switch -F47-* |
| q | Located in footwell, next to brake pedal |
| q | Checking → Chapter |
| 11 - | Brake light switch -F-* |
| q | Located in footwell, next to brake pedal |
| q | Checking → Chapter |
| 12 - | 4LV Control unit -J537-* |
| 13 - | Ignition transformer -N152-* |
| q | Marked for H.T. cables → Chapter |
| 14 - | Coolant temperature sender -G62-* |
| q | With coolant temperature gauge sender -G2- |
| 15 - | Exhaust gas recirculation valve -N18-*/** with potentiometer for exhaust gas recirculation -G212-* |
| q | → Rep. Gr.26 |
| 16 - | 6-pin connector |
| q | Black |
| q | For Lambda probe and Lambda probe heating |
| q | Contacts gold plated |
| 17 - | Hall sender -G40-* |
| q | → Item |
| 18 - | Lambda probe before catalytic converter -G39-*, 50 Nm |
| 19 - | Activated charcoal filter solenoid valve 1 -N80-*/** |
| q | In activated charcoal filter |
| q | Activated charcoal filter system → Rep. Gr.20 |
