Leon Mk2
| Injection pump: removal and refitting |
| 1) | If it is not, cut with a saw, following the measurements in the drawing. |
| Special tools and workshop equipment required |
| t | adapter -V.A.G 1318/10- |
| t | Fixing pin -T20102- |
| t | Manual vacuum pump -SAT 1390- |
| t | Adjustment rule -T20038- → Note |
| t | Two pivot spanner -U-30009 A- for dual drilled nuts |
| t | Extractor for the camshaft pinion -T20119- |
| t | Adjustment tool for the OT point (TDC) -U-20010- |
| t | Annular spanner -U-40072- |
| t | Torque wrench -SAT 8010- |
| t | Thickness callipers |
