seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Vehicles with old connector shape > < Continuation for both connector shapes

Leon Mk2

If display reads 120 °C, continue test as follows:
If display reads 120 °C, continue test as follows:
   
–  Pull the 4-pin connector off coolant temperature sender -G62- with coolant temperature gauge sender -G2--arrow-.
If the display jumps to -40 °C:
–  Press → key.
–  Press keys 0 and 6 for the “End output” function and confirm input with the Q key.
–  Switch off ignition.
–  Replace coolant temperature sender -G62- with coolant temperature gauge sender -G2- → Item.
If the display remains at 120 °C:
–  Press → key.
–  Press keys 0 and 6 for the “End output” function and confirm input with the Q key.
–  Switch off ignition.
  N24-0734
–  Connect test box -V.A.G 1598/22- to control unit wiring harness.
  N24-0709

Vehicles with old connector shape > < Continuation for both connector shapes