Leon Mk2
| ABS system components on the front axle: removing and fitting |
Note| Dismantling and fitting the ABS system components is identical if the brake callipers are FSIII or Lucas. |
| 1 - | Brake disc |
| 2 - | Cross-head bolt |
| q | 4 Nm |
| 3 - | Wheel housing with bearing and sensor ring |
| q | Sensor ring integrated into bearing oil seal |
| q | The ABS sensor ring is installed in the wheel hub |
| q | Replace after each removal |
| q | Removing and fitting → Running gear, axles, steering; Rep. Gr.40 |
| 4 - | Bolt |
| q | 8 Nm |
| 5 - | ABS rev. sensor |
| q | Verified by self-diagnosis |
| q | Before fitting the sensor, clean the inner surface of the hole and apply solid lubricant paste → Parts catalogue. |
| q | removing and fitting → Chapter. |
| 6 - | Wheel bearing housing |
| 7 - | Cover plate |
| 8 - | Bolt |
| q | 10 Nm |
