Leon Mk2
| Assembly overview - speed sensor on rear axle |
| 1 - | Axle body |
| 2 - | Torx bolt, 8 Nm |
| 3 - | ABS speed sensor |
| q | Before inserting sensor, clean hole inner surface and coat with high-temperature paste G 052 112 A3. |
| q | removing and installing → Chapter |
| 4 - | Brake line |
| 5 - | Axle connection |
| 6 - | Brake cable |
| 7 - | Hexagonal bolt |
| q | Specified torque → Running gear, axles, steering; Rep. gr.42. |
| 8 - | Torx bolt, 8 Nm |
| 9 - | Brake drum |
| q | Reset brake before removing brake drum → Chapter. |
| 10 - | Cap |
| q | Pressing off and driving in → Running gear, axles, steering; Rep. gr.42. |
| 11 - | Twelve-sided, self-locking nut |
| q | Renew after each removal → Running gear, axles, steering; Rep. gr.42. |
| 12 - | Wheel hub with wheel bearing |
| q | ABS sensor ring is installed in wheel bearing → Fig.. |
| q | Removing and installing → Running gear, axles, steering; Rep. gr.42. |
| 13 - | Brake carrier with brake pads |
| q | Reset brake before removing brake drum → Chapter. |
|
|
