seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Brake pads: removing and fitting - Brembo front wheel brake|Fitting > < Brake pads: removing and fitting - Brembo front wheel brake

Leon Mk2

Removal:
Removal:
–  Remove wheel.
  Note
Mark the brake pads that are going to be re-used before removing them. It is necessary to fit them in the same position. If not, the braking effect will not be uniform.
–  Connect the air bleeding bottle tube to the bleeding valve for the brake calliper and open the valve.
–  Fit the block for the brake pedal -VAG 1869/2-.
–  Close the bleeding valve and remove the bleeding bottle.
–  Remove the brake pads → Chapter.
   
–  Loosen the brake hose from the brake calliper -2-.
–  Remove bolt -1-.
–  Unscrew the bolts -3- and remove the brake calliper.
  E46-0047

Brake pads: removing and fitting - Brembo front wheel brake|Fitting > < Brake pads: removing and fitting - Brembo front wheel brake