Leak test performed by operating brake |
–
| Actuate brake pedal until the brake booster support is no longer present; can be recognised when the brake pedal is hard to move. |
–
| Press the brake pedal down approx. 20 mm out of the rest position. |
–
| Keep the force on the pedal constant for about 20 seconds. |
The brake pedal travel should not become longer. |
–
| Press pedal with substantial foot pressure. |
–
| Keep the force on the pedal constant for about 20 seconds. |
The brake pedal travel should not become longer. |
If the brake pedal sags during checking, the visual check of the brake system must be repeated. |
If no leaks are then found during the test, the brake master cylinder probably has a leak and must be renewed. |
Caution Ensure that no brake fluid enters the brake servo when renewing the brake master cylinder. |
|
|
|
|