seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Front brake calliper: repairs > < Piston for front brake clip: removing and installing|Removal

Leon Mk2

Installation
Installation
–  Clean the surfaces of the piston and ring gaskets with alcohol only and then dry.
–  Cover the piston and ring gasket with a thin layer of -G 052 152 A2- paste before fitting them.
   
–  Fit the outside sealing protective cover with sealing lip over the piston.
  V47-0310
–  Insert the inside sealing lip into the groove of the cylinder using wedge -U-30800-.
  Note!
During this operation, the piston has to be supported in front of the brake clip housing.
  E47-0015
–  Insert the piston into the brake clip housing using the device for retracting piston -T20055-
  Note!
In the course of this operation the outside seal falls into the groove in the piston.
  E47-0016

Front brake calliper: repairs > < Piston for front brake clip: removing and installing|Removal