Leon Mk2
Note!
|
1 - | Brake servo |
q | Removing and installing → Chapter. |
2 - | Tandem brake master cylinder |
3 - | Brake fluid reservoir, left-hand drive |
4 - | Sealing cap with switch for brake fluid level |
5 - | Brake fluid reservoir, right-hand drive |
6 - | Bracket |
7 - | Rubber damper |
8 - | Bolt, 8 Nm |
9 - | Self-locking nut, 8 Nm |
10 - | Control unit |
11 - | ABS/EDL hydraulic unit |
12 - | Brake pipe connection |
q | Hydraulic unit to front right brake caliper. |
13 - | Brake pipe connection |
q | Hydraulic unit to rear left brake caliper. |
14 - | Brake pipe connection |
q | Hydraulic unit to rear right brake caliper. |
15 - | Brake pipe connection |
q | Hydraulic unit to front left brake caliper. |
16 - | Brake pipe |
q | Master brake cylinder/secondary piston circuit to hydraulic unit. |
17 - | Brake pipe |
q | Brake master cylinder/primary piston circuit to hydraulic unit. |
18 - | Self-locking nut, 25 Nm |
q | Renew each time after removing. |