SEAT Workshop Service and Repair Manuals > Leon Mk2 > Running gear | Brake systems | ABS, ADR, TCS, EDL, ESP | Removing and installing parts of ABS system on front and rear axle | Removing and installing parts of ABS system on front axle, VW ll brake caliper | Removing and installing speed sensor on front axle

Removing and installing speed sensor on front axle

Removing

–	Raise vehicle.

–	Separate speed sensor and speed sensor wiring connector -1-.

–	Remove bolt -2- from wheel bearing housing.

–	Pull ABS speed sensor from wheel bearing housing.

Installing

–	Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with solid lubricant paste -G 000 650-.

–	Insert speed sensor into wheel bearing housing hole and tighten bolt to 10 Nm.

–	Connect speed sensor to speed sensor wiring.