Leon Mk2
Note!
|
Caution
| 1 - | Mounting bracket |
| q | Remove before removing steering column → Running gear, axles, steering; Front and four-wheel drive; Rep. Gr.48. |
| 2 - | Pivot pin for clutch and brake pedal |
| 3 - | Circlip |
| 4 - | Hexagon bolt, 25 Nm |
| 5 - | Self-locking hexagon nut, 25 Nm |
| q | Qty. 5 |
| q | For mounting bracket to stud/brake servo |
| 6 - | Brake light switch |
| q | Before installing brake light switch, secure brake pedal to brake servo push rod. |
| q | Adjusting brake light switch → Chapter. |
| 7 - | Mounting bush |
| q | For mounting steering column |
| 8 - | Mounting bush for brake pedal |
| 9 - | Mounting tube for return spring |
| 10 - | Return spring for brake pedal |
| 11 - | Brake pedal |
| 12 - | Pin |
| 13 - | Circlip |
| q | Ensure secure seating. |
| 14 - | Clutch pedal |
| q | Removing and installing → 5-speed manual gearbox 006; Rep. Gr.30 |
| 15 - | Stop |
| q | For clutch pedal |
| 16 - | Mounting |
| 17 - | Circlip |
| q | Ensure secure seating. |
| 18 - | Return spring |
| 19 - | Self-locking hexagon nut, 20 Nm |