Leon Mk2
| Servicing front wheel brakes, Cupra -R- brake caliper |
Note!| t | After replacing the brake pads, step on the brake pedal a few times with the vehicle stopped, for the pads to adapt to their working position. |
| t | Use an extraction bottle, which should only come into contact with the brake fluid, to extract fluid from the tank. Brake fluid is toxic and should never be sucked into the mouth through a flexible tube! |
| t | Wheel bolt tightening torque: 110 Nm. |
| t | Never reuse used brake fluid. |
| 1 - | Brake disc |
| q | Dimensions and wear limit → Chapter |
| q | In case of wear replace the discs of the same shaft. |
| q | Do not use force to separate the brake from the wheel stock, use deoxidant if necessary, as you could damage the brake disc. |
| 2 - | Cupra -R- brake clip |
| 3 - | Brake clip securing bolt Torque 110 Nm |
| 4 - | Clip support |
| 5 - | Brake pads |
| q | Removal and assembly → Chapter |
| q | Thickness 9 mm |
| 6 - | Brake pad securing bolt |
| 7 - | Compression spring |
| 8 - | Brake fluid hose |
| 9 - | Connection bolt support to clip Tightening torque 95 Nm |