seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Swinging arm: removing and fitting > < Removing

Leon Mk2

Fitting
Fitting
   
–  Fit the ball joint and secure with the bolt -1- to the bearing housing.
–  Fit the bolts -2- securing the ball joint assembly to the swinging arm on the marks made before removal.
  E40-0035
Tightening torques:
Swinging arm ball joint attachment
Use new bolts		20 Nm + 1/4 turn (90º)
Ball joint attachment to the bearing housing
Use a new bolt		50 Nm

   

Swinging arm: removing and fitting > < Removing