–
| Fit the wheel bearing -1-, the pressure tool-2- (the collar is placed onto the bearing) and the hollow piston cylinder-3- with the pull bolt onto the steering knuckle. |
–
| Fit the pressure tool-4- with the oblique part facing the steering knuckle and the special nut-5- on the inside. |
–
| Fit the wheel bearing using the pump. |
–
| Fit the securing ring with long nose pliers. |
2 - | Pressure tool -VAS 6016- |
3 - | Hollow piston cylinder -HKZ-15- |
5 - | Special nut - E-8-214- and pull bolt |
6 - | High-pressure hose and quick coupling |
|
|
|