seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

II - Wheel bearing, suspension strut, driveshaft assembly: removing and fitting > < Bearing cap bolt on the longitudinal member: verification
Bolts with collar for subframe
   
Bolts with collar for subframe
Anchor pointThreadBoltPart No.
Front subframeM12 × 1.5M12 × 1.5 x 95N 101 612.01 → Note
Rear subframeM12 × 1.5M12 × 1.5 x 95N 101 612.01
Subframe earM10M10 × 38N 019 541.1

1)  These bolts do not appear in the parts catalogue. They must be ordered specially. The tightening torque does not change.
   
1 - Bolt
2 - Hood nut
3 - Longitudinal member
4 - Subframe
5 - Metal-rubber bearing/ shaft bearing
  V40-0941

II - Wheel bearing, suspension strut, driveshaft assembly: removing and fitting > < Bearing cap bolt on the longitudinal member: verification