seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing subframe > < Fastening devicesT10096 : assembly

Leon Mk2

Fastening devicesT10096 : disassembly
Fastening devices -T10096 -: disassembly
Remove in reverse order. When installing, remove locating pins -T10096- one after the other and screw in new securing bolts in their place.
–  After completing the repair work, carry out a test drive. If the steering wheel is inclined during the run, the alignment of the axles must be checked → Chapter.
   
Specified torques
ComponentTightening torque
Subframe to body
t  Use new bolts.
70 Nm + 90°
Subframe to bracket
t  Use new bolts.
70 Nm + 90°
Anti-roll bar to coupling rod
t  Use new nut
t  Counterhold on multi-point socket of joint pin
65 Nm
Universal joint to steering box
t  Use new bolt.
30 Nm
Exhaust system bracket to subframe
→ Engine; Rep. gr.26

   

Removing and installing subframe > < Fastening devicesT10096 : assembly