seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Pressing in bonded rubber bush > < Subframe (front-wheel drive) - Repair

Leon Mk2

Pressing out bonded rubber bush
Pressing out bonded rubber bush
–  Remove subframe → Chapter.
–  Fit the assembly tool -T10244- to the strut support.
   
–  Press out both bonded rubber bushes together as shown.
  Note
t  The bevelled side of the expulsion tool -3372/1- should point towards the element -A- of the assembly tool -T10244- not to damage it.
t  The tube -T10244/3- has a larger internal diameter than the other. The subframe must lie against the larger internal diameter of the tube -T10244/3 -.
  N40-10075

Pressing in bonded rubber bush > < Subframe (front-wheel drive) - Repair