seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing lower transverse link|Installation > < Removing and installing lower transverse link
Removal:
Removal:
–  Measure the spacing from the centre of the wheel to the lower edge of the wheel housing → Chapter
–  Remove wheel.
–  Remove coil springs → Chapter.
   
–  Loosen the bolt -arrow- of the lower transversal swinging arm -1-.
Vehicles with dynamic headlight range control
  A42-0423
–  Remove the link rod of the vehicle level sender -G76--arrow A-.
Continued for all vehicles
–  Mark, using a felt tip pen, for example, the assembly position of the off-centre bolt -arrow B- on the strut.
–  Disengage and lower rear part of exhaust system.
–  Unscrew bolt -arrow B-.
–  Remove the lower transversal swinging arm.
  A42-0422

Removing and installing lower transverse link|Installation > < Removing and installing lower transverse link