Leon Mk2
| General overview, wheel bearing: repairs |
Note| t | No straightening or welding work is possible on the axle body or on the axle pivot |
| t | Always replace self locking nuts following their removal. |
| 1 - | Axle body |
| 2 - | Splash plate |
| 3 - | Brake disc |
| 4 - | 4 Nm |
| 5 - | Dustguard cover |
| q | Replace after removing |
| q | So that the seal is perfect, a new dust guard cover should always be used. |
| q | Only in this way can the optimal operation and long life of the part be guaranteed. |
| q | Releasing and inserting → Fig. |
| 6 - | Dodecagonal self locking nut |
| q | 175 Nm |
| q | Replace |
| 7 - | Wheel hub and bearing assembly |
| q | The wheel bearing and hub are fitted together in one casing. |
| q | This wheel hub and bearing unit does not require inspection or maintenance, no adjustment or repair work can be done on it. |
| 8 - | 60 Nm |
| 9 - | Brake drum |
| 10 - | Hand brake cable |
| 11 - | Brake plate with brake shoe |
